Gallery
Showing 1027–1044 of 6172 results
-
Laptop Battery, Razer
RC30-0281, RZ09-0281, RZ09-0310, RZ09-03100, RZ09-03101, RZ09-03102, RC30-02810200, 3ICP6/59/84 Laptop internal Battery for Razer Blade Stealth 13.3 Early 2018 2019 13 i7-8565U RZ09-02810 RZ09-02812 RZ09-0310 RZ09-03100 Z09-02810E71 RZ09-02812E71 RZ09-02812E52-R3U1 RZ09-03102E52 series
Laptop Battery, RazerRC30-0281, RZ09-0281, RZ09-0310, RZ09-03100, RZ09-03101, RZ09-03102, RC30-02810200, 3ICP6/59/84 Laptop internal Battery for Razer Blade Stealth 13.3 Early 2018 2019 13 i7-8565U RZ09-02810 RZ09-02812 RZ09-0310 RZ09-03100 Z09-02810E71 RZ09-02812E71 RZ09-02812E52-R3U1 RZ09-03102E52 series
Technical Specifications
- Brand : Razer
- Suitable Model : Razer Blade Stealth 13.3 Early 2018 2019 13 i7-8565U RZ09-02810 RZ09-02812 RZ09-0310 RZ09-03100 Z09-02810E71 RZ09-02812E71 RZ09-02812E52-R3U1 RZ09-03102E52 series
- Battery Part Number: RC30-0281, RZ09-0281, RZ09-0310, RZ09-03100, RZ09-03101, RZ09-03102, RC30-02810200, 3ICP6/59/84
- Cell Chemistry : Lithium-Polymer
- Backup time : Depends on your consumption and usages.
- Life cycles : 500+ Times
- Product Condition : Brand new & Original (Real capacity, high quality cells, longer life cycles, convenient to use)
- Safeguard : Against incorrect voltage, short circuit, internal overheating.
- Warranty: 06 Months(180 days)
Note:
1. The first use of the battery, the battery voltage may be too low, you need to recharge the standby 06 to 08 hours before normal use.
2. First of all you should use the original AC Adapter/Charger in your laptop. Otherwise, WIT is not liable for any kind of damages.*** Attention:
- To avoid wrong order placed or wrong item you bought, please check out the battery image, Model/Type/Part/Product Number, connector, etc. with your existing battery , carefully before ordering.
- Please compare with your original battery before purchase , to make sure you have choose the correct battery model .
- Before placing your order, Please refer to the picture and check it. Because the products produced by different factories will have differences.
- Please read the battery manual carefully before installing the battery; If the battery is going to be stored for a long time (more than 3 months), it must be charged over 80%, it must be stored in a dry environment with a temperature range of 10-35 Celsius degree, avoid exposure to the sunlight; Don’t disassemble & crush , don’t pierce the battery with any sharp knife.
- If the new battery is not recognized during the initial installation, please reinstall and check if the interface is fully connected. Discharge the new battery to 5% (not 0%), then charge and cycle 3-4 times to wake up the new battery.
SKU: WIT11782 -
Laptop Battery, Razer
RC30-0328, RC30-0328(4ICP5/46/108) Laptop internal Battery for Razer Blade 15 Base Edition Model 2020 2021 RTX 2060 2070 3060 3070 RZ09-0328 RZ09-0351 RZ09-0369 RZ09-03287E22-R341 RZ09-03287W22-R3W1 RZ09-03286W22-R3W1 RZ09-0369AG22-R3G1 series
Laptop Battery, RazerRC30-0328, RC30-0328(4ICP5/46/108) Laptop internal Battery for Razer Blade 15 Base Edition Model 2020 2021 RTX 2060 2070 3060 3070 RZ09-0328 RZ09-0351 RZ09-0369 RZ09-03287E22-R341 RZ09-03287W22-R3W1 RZ09-03286W22-R3W1 RZ09-0369AG22-R3G1 series
Technical Specifications
- Brand : Razer
- Suitable Model : Razer Blade 15 Base Edition Model 2020 2021 RTX 2060 2070 3060 3070 RZ09-0328 RZ09-0351 RZ09-0369 RZ09-03287E22-R341 RZ09-03287W22-R3W1 RZ09-03286W22-R3W1 RZ09-0369AG22-R3G1 series
- Battery Part Number: RC30-0328, RC30-0328(4ICP5/46/108)
- Cell Chemistry : Lithium-Polymer
- Backup time : Depends on your consumption and usages.
- Life cycles : 500+ Times
- Product Condition : Brand new & Original (Real capacity, high quality cells, longer life cycles, convenient to use)
- Safeguard : Against incorrect voltage, short circuit, internal overheating.
- Warranty: 06 Months/180 days
Note:
1. The first use of the battery, the battery voltage may be too low, you need to recharge the standby 06 to 08 hours before normal use.
2. First of all you should use the original AC Adapter/Charger in your laptop. Otherwise, WIT is not liable for any kind of damages.*** Attention:
- To avoid wrong order placed or wrong item you bought, please check out the battery image, Model/Type/Part/Product Number, connector, etc. with your existing battery , carefully before ordering.
- Please compare with your original battery before purchase , to make sure you have choose the correct battery model .
- Before placing your order, Please refer to the picture and check it. Because the products produced by different factories will have differences.
- Please read the battery manual carefully before installing the battery; If the battery is going to be stored for a long time (more than 3 months), it must be charged over 80%, it must be stored in a dry environment with a temperature range of 10-35 Celsius degree, avoid exposure to the sunlight; Don’t disassemble & crush , don’t pierce the battery with any sharp knife.
- If the new battery is not recognized during the initial installation, please reinstall and check if the interface is fully connected. Discharge the new battery to 5% (not 0%), then charge and cycle 3-4 times to wake up the new battery.
SKU: WIT11783 -
Laptop Battery, Razer
RC30-0370, RC30-0370(4ICP4/47/140), RZ09-0370, RZ09-0427, Laptop internal Battery for Razer Blade 14 2021 2022, Razer Blade 14-inch Ryzen 2022, Razer Blade 14-inch Ryzen 2021, Razer Blade RZ09-0370, RZ09-0427, RZ09-0370AE23, RZ09-0370BEA3-R3U1, RZ09-0370CEA3-R3U1, RZ09-0427EE23-R3U1, RZ09-0427NEA3-R3U1, RZ09-0427PEA3-R3U1 series
Laptop Battery, RazerRC30-0370, RC30-0370(4ICP4/47/140), RZ09-0370, RZ09-0427, Laptop internal Battery for Razer Blade 14 2021 2022, Razer Blade 14-inch Ryzen 2022, Razer Blade 14-inch Ryzen 2021, Razer Blade RZ09-0370, RZ09-0427, RZ09-0370AE23, RZ09-0370BEA3-R3U1, RZ09-0370CEA3-R3U1, RZ09-0427EE23-R3U1, RZ09-0427NEA3-R3U1, RZ09-0427PEA3-R3U1 series
Technical Specifications
- Brand : Razer
- Suitable Model : Razer Blade 14 2021 2022 RZ09-0370 RZ09-0368 RZ09-0427 RZ09-0370AE23 RZ09-0370BEA3-R3U1 RZ09-0370CEA3-R3U1 RZ09-0427EE23-R3U1 RZ09-0427NEA3 RZ09-0427PEA3 series
- Battery Part Number: RC30-0370, RC30-0370(4ICP4/47/140), RZ09-0370, RZ09-0427
- Cell Chemistry : Lithium-Polymer
- Backup time : Depends on your consumption and usages.
- Life cycles : 500+ Times
- Product Condition : Brand new & Original (Real capacity, high quality cells, longer life cycles, convenient to use)
- Safeguard : Against incorrect voltage, short circuit, internal overheating.
- Warranty: 06 Months/180 days
Note:
1. The first use of the battery, the battery voltage may be too low, you need to recharge the standby 06 to 08 hours before normal use.
2. First of all you should use the original AC Adapter/Charger in your laptop. Otherwise, WIT is not liable for any kind of damages.*** Attention:
- To avoid wrong order placed or wrong item you bought, please check out the battery image, Model/Type/Part/Product Number, connector, etc. with your existing battery , carefully before ordering.
- Please compare with your original battery before purchase , to make sure you have choose the correct battery model .
- Before placing your order, Please refer to the picture and check it. Because the products produced by different factories will have differences.
- Please read the battery manual carefully before installing the battery; If the battery is going to be stored for a long time (more than 3 months), it must be charged over 80%, it must be stored in a dry environment with a temperature range of 10-35 Celsius degree, avoid exposure to the sunlight; Don’t disassemble & crush , don’t pierce the battery with any sharp knife.
- If the new battery is not recognized during the initial installation, please reinstall and check if the interface is fully connected. Discharge the new battery to 5% (not 0%), then charge and cycle 3-4 times to wake up the new battery.
SKU: WIT12108 -
Screen Protector
Removable Magnetic iPad Screen Protector for iPad Mini 10.2″ & iPad Mini 10.5″ (Clear/Transparent)
Screen ProtectorRemovable Magnetic iPad Screen Protector for iPad Mini 10.2″ & iPad Mini 10.5″ (Clear/Transparent)
Technical Specifications
- Product Type: WIWU Removable Magnetic iPad Screen Protector
- Designed for: iPad Mini 10.2″ & iPad Mini 10.5″
- Brand: WIWU
- Possibility to attach and remove it repeatedly without fear of bubble formation.
- When you put it on the ground, the magnetic attraction always aligns the correct position.
- More reduction in pen tip wear and sensitive touch when drawing thanks to magnetic suction.
- Feel the realism with its special design that feels like paper.
- You can wash it when you feel it is dirty and put it back on after drying.
- Effectively resists glare and reduces light reflection to protect eyes.
- Thanks to its hydrophobic feature, it does not make oily and fingerprints.
- Item Weight: 194 g
SKU: WIT11711 -
iPad Accessories, Waltz Rotating Keyboard Case
Rotatable Wireless Bluetooth Keyboard Case including Trackpad, Pencil Holder with protective case for iPad Air 5th 4th Generation 10.9″ 2020, iPad Air 2020, iPad Pro 11″ 2021 2020 2018, iPad 9th 8th 7th Gen iPad 9.7″ 2018, Brand : WiWU, Model: GB 4943.1-2011, (NOT including iPad)
iPad Accessories, Waltz Rotating Keyboard CaseRotatable Wireless Bluetooth Keyboard Case including Trackpad, Pencil Holder with protective case for iPad Air 5th 4th Generation 10.9″ 2020, iPad Air 2020, iPad Pro 11″ 2021 2020 2018, iPad 9th 8th 7th Gen iPad 9.7″ 2018, Brand : WiWU, Model: GB 4943.1-2011, (NOT including iPad)
Technical Specifications
- Product Name: Waltz Rotating Magic Smart Keyboard Case for iPad
- Brand : WiWU
- Model: GB 4943.1-2011
- Material: ABS+PC
- Battery capacity: 450mAh
- Working voltage: 3.0-4.2V
- Operating distance: 10m
- Working time: Backlight on – 5h, backlight off – 55h
- Charging time: 2.5 hours
- Charging interface: Type-C
- Standby time: Up to 150 days
- Product Condition : Brand New & Original
- Product Color: Black
- Rotation : 360° (Degree)
- Compatible with : iPad (10.2” & 10.5”) and (10.9” & 11”) – Please select the compatibility options before purchase
- Warranty : Not Applicable
**** Please Note……………..
- To avoid wrong order placed or wrong item you bought, above is something you need to read before ordering.
SKU: WIT11125 -
Cable, Laptop CMOS/RTC Battery
RTC BIOS CMOS CR2032 Battery (3V and 210mAh) with 2 pins Wire Cable (measure ~2.6 inches) connector size: (3mm*1.25mm) for remote controls, computer motherboard CMOS, laptops, notebooks, etc.
Cable, Laptop CMOS/RTC BatteryRTC BIOS CMOS CR2032 Battery (3V and 210mAh) with 2 pins Wire Cable (measure ~2.6 inches) connector size: (3mm*1.25mm) for remote controls, computer motherboard CMOS, laptops, notebooks, etc.
Technical Specifications
- Wrapped CMOS CR2032 lithium battery with wire leads and connector pre-attached
- Wire leads measure ~2.6 inches
- Lithium metal coin cell
- Used for various household needs (remote controls, CMOS, bios, computer motherboards, brush bots, etc.)
- Excellent for hobby electronics and science fair projects
- Each battery is 3V and 210mAh.
- Connector size : 3mm*1.25mm (see photo for connector specifications)
Warranty: Not Applicable (Please note that batteries are non-returnable)
NO RETURNS POLICY ON BATTERIES:
At our online store, we prioritize providing our customers with brand new and high-quality lithium batteries. Due to the nature of batteries, we do not accept returns on these batteries as we cannot verify their usage or condition after purchase. By only selling new batteries, we are able to offer competitive pricing and ensure that all of our customers receive only the best products. Thank you for choosing us for your battery needs.
NO RETURNS:
Due to the nature of this product and to protect our staff and customers we do not accept returns on this product. You will not be allowed to return this product.SKU: WIT11591 -
Cable, Laptop CMOS/RTC Battery
RTC BIOS CMOS CR2032 Battery (3V and 210mAh) with 3 pins Wire Cable (measure ~1.2 inches) connector size: (4mm*5mm/3.5mm*6.0mm) for remote controls, computer motherboard CMOS, laptops, notebooks, etc.
Cable, Laptop CMOS/RTC BatteryRTC BIOS CMOS CR2032 Battery (3V and 210mAh) with 3 pins Wire Cable (measure ~1.2 inches) connector size: (4mm*5mm/3.5mm*6.0mm) for remote controls, computer motherboard CMOS, laptops, notebooks, etc.
Technical Specifications
- Wrapped CMOS CR2032 lithium battery with wire leads and connector pre-attached
- Wire leads measure ~1.2 inches
- Lithium metal coin cell
- Used for various household needs (remote controls, CMOS, bios, computer motherboards, brush bots, etc.)
- Excellent for hobby electronics and science fair projects
- Each battery is 3V and 210mAh.
- Connector size : 4mm*5mm/3.5mm*6.0mm (see photo for connector specifications)
Warranty: Not Applicable (Please note that batteries are non-returnable)
NO RETURNS POLICY ON BATTERIES:
At our online store, we prioritize providing our customers with brand new and high-quality lithium batteries. Due to the nature of batteries, we do not accept returns on these batteries as we cannot verify their usage or condition after purchase. By only selling new batteries, we are able to offer competitive pricing and ensure that all of our customers receive only the best products. Thank you for choosing us for your battery needs.
NO RETURNS:
Due to the nature of this product and to protect our staff and customers we do not accept returns on this product. You will not be allowed to return this product.SKU: WIT11590 -
Cable, Laptop CMOS/RTC Battery
RTC BIOS CMOS ML1220/CR1220 Battery (3V and 210mAh) with 2 pins Wire Cable (measure ~1.5 inches) connector size: (3mm*1.25mm) for Dell XPS 15 9550 9560 Precision 5510 7350, Latitude 12 7275
Cable, Laptop CMOS/RTC BatteryRTC BIOS CMOS ML1220/CR1220 Battery (3V and 210mAh) with 2 pins Wire Cable (measure ~1.5 inches) connector size: (3mm*1.25mm) for Dell XPS 15 9550 9560 Precision 5510 7350, Latitude 12 7275
Technical Specifications
- Wrapped CMOS ML1220/CR1220 lithium battery with wire leads and connector pre-attached
- Wire leads measure ~1.5 inches
- Lithium metal coin cell
- Used for various household needs (remote controls, CMOS, bios, computer motherboards, brush bots, etc.)
- Excellent for hobby electronics and science fair projects
- Each battery is 3V and 210mAh.
- Connector size : 3mm*1.25mm (see photo for connector specifications)
Warranty: Not Applicable (Please note that batteries are non-returnable)
NO RETURNS POLICY ON BATTERIES:
At our online store, we prioritize providing our customers with brand new and high-quality lithium batteries. Due to the nature of batteries, we do not accept returns on these batteries as we cannot verify their usage or condition after purchase. By only selling new batteries, we are able to offer competitive pricing and ensure that all of our customers receive only the best products. Thank you for choosing us for your battery needs.
NO RETURNS:
Due to the nature of this product and to protect our staff and customers we do not accept returns on this product. You will not be allowed to return this product.SKU: WIT11592 -
Cable, Laptop CMOS/RTC Battery
RTC CMOS CR2032 Battery (3V and 210mAh) with 2 pins Wire Cable (measure ~3.5 inches) and JST SHR-02V-S-B (1mm pitch) connector (2mm*3mm) for remote controls, computer motherboard CMOS, laptops, notebooks, etc.
Cable, Laptop CMOS/RTC BatteryRTC CMOS CR2032 Battery (3V and 210mAh) with 2 pins Wire Cable (measure ~3.5 inches) and JST SHR-02V-S-B (1mm pitch) connector (2mm*3mm) for remote controls, computer motherboard CMOS, laptops, notebooks, etc.
Technical Specifications
- Wrapped CMOS CR2032 lithium battery with wire leads and connector pre-attached
- Wire leads measure ~3.5 inches
- Lithium metal coin cell
- Used for various household needs (remote controls, CMOS, bios, computer motherboards, brush bots, etc.)
- Excellent for hobby electronics and science fair projects
- Each battery is 3V and 210mAh.
- JST SHR-02V-S-B (1mm pitch) connector (see photo for connector specifications)
Warranty: Not Applicable (Please note that batteries are non-returnable)
NO RETURNS POLICY ON BATTERIES:
At our online store, we prioritize providing our customers with brand new and high-quality lithium batteries. Due to the nature of batteries, we do not accept returns on these batteries as we cannot verify their usage or condition after purchase. By only selling new batteries, we are able to offer competitive pricing and ensure that all of our customers receive only the best products. Thank you for choosing us for your battery needs.
NO RETURNS:
Due to the nature of this product and to protect our staff and customers we do not accept returns on this product. You will not be allowed to return this product.SKU: WIT11589 -
Laptop Battery, Razer
RZ09-0166 FI 3ICP6/87/62/2 Laptop battery for Razer Blade F1, Razer Blade Pro 17.3″ 4K i7-7820HK, Razer Blade Pro 2016 17.3″ 4K series, P/N: RZ09-01662E52, RZ09-01662E52-R3U1, RZ09-01662E53-R3U1, RZ09-01662E54-R3U1, RZ09-01663, RZ09-01663E53-R341, RZ09-01663E53-R3U1
Laptop Battery, RazerRZ09-0166 FI 3ICP6/87/62/2 Laptop battery for Razer Blade F1, Razer Blade Pro 17.3″ 4K i7-7820HK, Razer Blade Pro 2016 17.3″ 4K series, P/N: RZ09-01662E52, RZ09-01662E52-R3U1, RZ09-01662E53-R3U1, RZ09-01662E54-R3U1, RZ09-01663, RZ09-01663E53-R341, RZ09-01663E53-R3U1
Technical Specifications
- Brand : RAZER
- Suitable Model : Razer Blade F1, Razer Blade Pro 17.3″ 4K i7-7820HK, Razer Blade Pro 2016 17.3″ 4K series
- Battery Type Number: RZ09-0166 FI 3ICP6/87/62/2
- Cell Chemistry : Lithium Polymer( Li-Polymer)
- Backup time : Depends on your consumption and usages.
- Life cycles : 500+ Times
- Product Condition : Brand new & Original (Real capacity, high quality cells, longer life cycles, convenient to use)
- Safeguard : Against incorrect voltage, short circuit, internal overheating.
- Warranty : 06 Months(180 days)
Note:
1. The first use of the battery, the battery voltage may be too low, you need to recharge the standby 06 to 08 hours before normal use.
2. First of all you should use the original AC Adapter/Charger in your laptop. Otherwise, WIT is not liable for any kind of damages.*** Attention: To avoid wrong order placed or wrong item you bought, please check out the battery image, Model/Type/Part/Product Number, connector, etc. with your existing battery , carefully before ordering.
SKU: WIT11317 -
HP, Laptop Battery
SE04XL, SEO4XL ,860724-2B1, HSTNN-DB7Q, 860724-281, 849910-850 Laptop internal Battery for HP Pro Tablet x2 612 G2 series
HP, Laptop BatterySE04XL, SEO4XL ,860724-2B1, HSTNN-DB7Q, 860724-281, 849910-850 Laptop internal Battery for HP Pro Tablet x2 612 G2 series
Technical Specifications
- Brand : HP
- Suitable Model : HP Pro Tablet x2 612 G2 series
- Battery Part Number: SE04XL SEO4XL 860724-2B1 HSTNN-DB7Q 860724-281 849910-850
- Cell Chemistry : Lithium-Polymer
- Backup time : Depends on your consumption and usages.
- Life cycles : 500+ Times
- Product Condition : Brand new & Original (Real capacity, high quality cells, longer life cycles, convenient to use)
- Safeguard : Against incorrect voltage, short circuit, internal overheating.
- Warranty: 06 Months(180 days)
Note:
1. The first use of the battery, the battery voltage may be too low, you need to recharge the standby 06 to 08 hours before normal use.
2. First of all you should use the original AC Adapter/Charger in your laptop. Otherwise, WIT is not liable for any kind of damages.*** Attention:
- To avoid wrong order placed or wrong item you bought, please check out the battery image, Model/Type/Part/Product Number, connector, etc. with your existing battery , carefully before ordering.
- Please compare with your original battery before purchase , to make sure you have choose the correct battery model .
- Before placing your order, Please refer to the picture and check it. Because the products produced by different factories will have differences.
- Please read the battery manual carefully before installing the battery; If the battery is going to be stored for a long time (more than 3 months), it must be charged over 80%, it must be stored in a dry environment with a temperature range of 10-35 Celsius degree, avoid exposure to the sunlight; Don’t disassemble & crush , don’t pierce the battery with any sharp knife.
- If the new battery is not recognized during the initial installation, please reinstall and check if the interface is fully connected. Discharge the new battery to 5% (not 0%), then charge and cycle 3-4 times to wake up the new battery.
SKU: WIT11779 -
Dell, Inspiron, Laptop Battery
TKV2V, TKV2V, W4FYY, X3X3X, 0M4RNN, FMHC10 Laptop battery for DELL Inspiron 14VR M4010 N4020 N4030 N4030D series
Dell, Inspiron, Laptop BatteryTKV2V, TKV2V, W4FYY, X3X3X, 0M4RNN, FMHC10 Laptop battery for DELL Inspiron 14VR M4010 N4020 N4030 N4030D series
Technical Specifications
- Laptop Brand : Dell
- Compatible Laptop Series : Dell Inspiron 14VR M4010 N4020 N4030 N4030D series
- Battery Part Number : 0KCFPM 0M4RNN 312-1231 KG9KY W4FYY X3X3X
- Cell Chemistry : Lithium-Ion
- Backup time : Depends on your consumption and usages.
- Life cycles : 500+ Times
- Product Condition : Brand New (QC Pass)
- Warranty: 03 Months/90 days
Note:
1. The first use of the battery, the battery voltage may be too low, you need to recharge the standby 06 to 08 hours before normal use.
2. First of all you should use the original AC Adapter/Charger in your laptop. Otherwise, WIT is not liable for any kind of damages.SKU: WIT11994 -
Dell, Inspiron, Laptop Battery, Latitude
TN70C, V6W33, G91J0 Laptop Battery for Dell Latitude 3320 3420 3520, Vostro 3510 3511 3515 5310 5410 5415 5510 5515, Inspiron 5418 5518 7415 2-in-1 series
Dell, Inspiron, Laptop Battery, LatitudeTN70C, V6W33, G91J0 Laptop Battery for Dell Latitude 3320 3420 3520, Vostro 3510 3511 3515 5310 5410 5415 5510 5515, Inspiron 5418 5518 7415 2-in-1 series
Technical Specifications
- Brand : Dell
- Suitable Model : Latitude 3320 3420 3520, Vostro 3510 3511 3515 5310 5410 5415 5510 5515, Inspiron 5418 5518 7415 2-in-1 series
- Battery Type Number: TN70C, V6W33, G91J0
- Cell Chemistry : Lithium Polymer( Li-Polymer)
- Battery Category: Type : ‘A’ Type: ‘B’ & Type: ‘C’ (Please select the type options before purchase)
- Backup time : Depends on your consumption and usages.
- Life cycles : 500+ Times
- Product Condition : Brand new & Original (Real capacity, high quality cells, longer life cycles, convenient to use)
- Safeguard : Against incorrect voltage, short circuit, internal overheating.
- Warranty : 06 Months(180 days)
Note:
1. The first use of the battery, the battery voltage may be too low, you need to recharge the standby 06 to 08 hours before normal use.
2. First of all you should use the original AC Adapter/Charger in your laptop. Otherwise, WIT is not liable for any kind of damages.*** Attention: To avoid wrong order placed or wrong item you bought, please check out the battery image, Model/Type/Part/Product Number, connector, etc. with your existing battery , carefully before ordering.
SKU: WIT11316 -
40GB, IDE/SATA, Laptop Storage Device
TOSHIBA 40GB Internal 2.5″ 16 MB IDE 5400 RPM MK4026GAX Hard Disk Drive HDD
40GB, IDE/SATA, Laptop Storage DeviceTOSHIBA 40GB Internal 2.5″ 16 MB IDE 5400 RPM MK4026GAX Hard Disk Drive HDD
Technical Specification
- Storage Capacity : 40GB
- Device Type: Hard Disk Drive – internal
- Rotational Speed : 5400 RPM stands for “revolutions per minute“
- HDD Manufacturer : Toshiba
- Interface: IDE connector (PATA)-Ultra ATA 100
- Connector Type : Spin Point M5 series , 44 pins
- HDD Model: MK4026GAX
- Buffer DRAM Size (Cache) : 8 MB
- IDE Form Factor : 2.5 inch
- Diagram : Width:2.8 inch * Depth: 3.9 inch* Height: 0.4 inch
- Features: Load/unload technology, NoiseGuard, SilentSeek technology, Perpendicular Recording, S.M.A.R.T.
- Supporting OS : Windows 95, 98, NT, 2000, ME, XP, VISTA & Win 7
- Drive Transfer Rate: 100 MBps (external)
- Internal Data Rate: 103 MBps
- Average Seek Time : 11 ms
- Average Latency : 5.5 ms
- Product Status : Refurbished & Fully Tested.
- Guarantee : Test only
- Fitting Charge : Not Applicable
*** Kindly Note :
To avoid wrong order placed or wrong item you bought, please select your required storage capacity below or check the product interface(connector) or form factor or identifying number etc. carefully before ordering.
SKU: WIT12131 -
Laptop LVDS LED LCD Screen Ribbon Cable, Toshiba
Toshiba Satellite L40, L40-B, L40D L40D-A L40D-B C40 C45 C45-B CASU-1A EDP P/N: 1422-01RM000 Laptop LVDS LED LCD Screen Ribbon Cable, Connector Pin: 30 pins
Laptop LVDS LED LCD Screen Ribbon Cable, ToshibaToshiba Satellite L40, L40-B, L40D L40D-A L40D-B C40 C45 C45-B CASU-1A EDP P/N: 1422-01RM000 Laptop LVDS LED LCD Screen Ribbon Cable, Connector Pin: 30 pins
Technical Specifications
- Brand : Toshiba
- Product Type: LVDS LCD LED Flex Video Screen Cable
- Compatible Laptop: Toshiba L40 L40D L40D-A L40D-B C40 C45 C45-B CASU-1A
- Part No : 1422-01RM000
- Connector Pin: 30 pins
- Web Camera Cable: No
- Products Status: Brand New & Original (Fully Tested)
- Warranty : No
- Fitting Charge : Applicable
Note : To avoid wrong order placed or wrong item you bought, please check the product part number and laptop model number carefully before ordering.
SKU: WIT11944 -
Apple MacBook Accessories, Power ON/OFF Button
Touch ID Power Button/Power Button/Touch ID Button/Power ON/OFF Button with flex cable for Apple Macbook Air M2 13.6″ A2681 (EMC 4074) 2022 & Macbook Air M2 15.3″ A2941 2023, P/N: 821-04012-A, 821-04012-02
Apple MacBook Accessories, Power ON/OFF ButtonTouch ID Power Button/Power Button/Touch ID Button/Power ON/OFF Button with flex cable for Apple Macbook Air M2 13.6″ A2681 (EMC 4074) 2022 & Macbook Air M2 15.3″ A2941 2023, P/N: 821-04012-A, 821-04012-02
Technical Specifications
- Product Type: Touch ID Reader Power Button with Flex Cable
- Brand : Apple
- Part Number : 821-04012-A, 821-04012-02
- Fit for Laptop Model: MacBook Air Retina 13.6″ M2 A2681 2022 and Macbook Air M2 15.3″ A2941 2023
- Compatible Year : 2022 & 2023
- Product Condition : Replacement(New)
- Warranty : NO
- Fitting Charge : Applicable
Important Note:
Fingerprint reader will not work (you can only use your original power button that’s paired with the logic board).Replaces the button with ON/OFF function only.Note:
- Manufacturers often use a different or revised part for the same model. You must confirm the stated FRU “First referral units” or MPN “Manufacturers part number” matches with your part! Also check the illustrative item photo, item specifics and compare all with your original part to ensure compatibility!
- Actual item as shown in photos. Kindly compare your original item with the photos provided for the listing to make sure that you are purchasing the correct parts. Please check both the models and pictures before purchasing.
- When you buy the ON/OFF Power Button Switch Board, please be sure about the model number, part number and image.
- Professional skill and techniques required for proper installation..
- Laptops with the same model number sometimes may have different types, please check the image which shows the actual product carefully and ensure it is the same as yours.
SKU: WIT11683 -
Apple MacBook Accessories, Power ON/OFF Button
Touch ID Power Button/Power Button/Touch ID Button/Power ON/OFF Button with flex cable for Apple Macbook Pro/Max M1 16″ A2485 (EMC 3651) Late 2021 & Macbook Pro/Max M2 16″ A2780 (EMC 8103) Early 2023, P/N: PPN: 821-03471-04, APN: 661-23550
Apple MacBook Accessories, Power ON/OFF ButtonTouch ID Power Button/Power Button/Touch ID Button/Power ON/OFF Button with flex cable for Apple Macbook Pro/Max M1 16″ A2485 (EMC 3651) Late 2021 & Macbook Pro/Max M2 16″ A2780 (EMC 8103) Early 2023, P/N: PPN: 821-03471-04, APN: 661-23550
Technical Specifications
- Product Type: Touch ID Reader Power Button with Flex Cable
- Brand : Apple
- Part Number : PPN: 821-03471-04, APN: 661-23550
- Fit for Laptop Model: Apple Macbook Pro/Max M1 16″ A2485 (EMC 3651) Late 2021 & Macbook Pro/Max M2 16″ A2780 (EMC 8103) Early 2023
- Compatible Year : Late 2021 & Early 2023
- Product Condition : Replacement(New)
- Warranty : NO
- Fitting Charge : Applicable
Important Note:
Fingerprint reader will not work (you can only use your original power button that’s paired with the logic board).Replaces the button with ON/OFF function only.Note:
- Manufacturers often use a different or revised part for the same model. You must confirm the stated FRU “First referral units” or MPN “Manufacturers part number” matches with your part! Also check the illustrative item photo, item specifics and compare all with your original part to ensure compatibility!
- Actual item as shown in photos. Kindly compare your original item with the photos provided for the listing to make sure that you are purchasing the correct parts. Please check both the models and pictures before purchasing.
- When you buy the ON/OFF Power Button Switch Board, please be sure about the model number, part number and image.
- Professional skill and techniques required for proper installation..
- Laptops with the same model number sometimes may have different types, please check the image which shows the actual product carefully and ensure it is the same as yours.
SKU: WIT11682 -
Apple MacBook Accessories, Power ON/OFF Button
Touch ID Power Button/Power Button/Touch ID Button/Power ON/OFF Button with flex cable forApple Macbook Pro/Max M1 14″ A2442 (EMC 3650) Late 2021 & Macbook Pro M2 14″ A2779 (EMC 8102) Early 2023, P/N: 821-03283-05, 821-03283-A, 661-23549
Apple MacBook Accessories, Power ON/OFF ButtonTouch ID Power Button/Power Button/Touch ID Button/Power ON/OFF Button with flex cable forApple Macbook Pro/Max M1 14″ A2442 (EMC 3650) Late 2021 & Macbook Pro M2 14″ A2779 (EMC 8102) Early 2023, P/N: 821-03283-05, 821-03283-A, 661-23549
Technical Specifications
- Product Type: Touch ID Reader Power Button with Flex Cable
- Brand : Apple
- Part Number : 821-03283-05, 821-03283-A, 661-23549
- Fit for Laptop Model: Apple Macbook Pro/Max M1 14″ A2442 (EMC 3650) Late 2021 & Macbook Pro M2 14″ A2779 (EMC 8102) Early 2023
- Compatible Year : Late 2021 & Early 2023
- Product Condition : Replacement(New)
- Warranty : NO
- Fitting Charge : Applicable
Important Note:
Fingerprint reader will not work (you can only use your original power button that’s paired with the logic board).Replaces the button with ON/OFF function only.Note:
- Manufacturers often use a different or revised part for the same model. You must confirm the stated FRU “First referral units” or MPN “Manufacturers part number” matches with your part! Also check the illustrative item photo, item specifics and compare all with your original part to ensure compatibility!
- Actual item as shown in photos. Kindly compare your original item with the photos provided for the listing to make sure that you are purchasing the correct parts. Please check both the models and pictures before purchasing.
- When you buy the ON/OFF Power Button Switch Board, please be sure about the model number, part number and image.
- Professional skill and techniques required for proper installation..
- Laptops with the same model number sometimes may have different types, please check the image which shows the actual product carefully and ensure it is the same as yours.
SKU: WIT11684
