I40-4S2200-G1L3, I40-4S2200-M1A2, I40-4S2200-S1B1, I40-4S2600-C1L3, I40-4S2600-G1L3 Laptop Battery for Advent Roma R410C, Roma 4001, Roma R410SU, Roma R410, Roma C900, Roma R410SG, Roma R410IU, Roma 1001, Roma 3000, Roma 2000, Roma 1000, Roma 2001 FOUNDER R410 R410IU

Technical Specifications 

• Brand : Lenovo
• Suitable Model : Lenovo Ideapad Flex 3-11IGL05, Flex 3-11ADA05, Flex 3-11IGL05 (Type: 82B2) series 
  
• Battery Part Number: L19C3PF8, 5B10X02593, SB10X02595, L19M3PF8, 5B10X02604, SB10X02592, 3ICP5/41/110, 3ICP5/41/1100
• Cell Chemistry : Lithium-Polymer
• Backup time : Depends on your consumption and usages.
• Life cycles : 500+ Times
• Product Condition : Brand new & Original (Real capacity, high quality cells, longer life cycles, convenient to use)
• Safeguard : Against incorrect voltage, short circuit, internal overheating.
• Warranty: 06 Months(180 days)

Note:

1. The first use of the battery, the battery voltage may be too low, you need to recharge the standby 06 to 08 hours before normal use.
2. First of all you should use the original AC Adapter/Charger in your laptop. Otherwise, WIT  is not liable for any kind of damages.

*** Attention:  

1. To avoid wrong order placed or wrong item you bought, please check out the battery image, Model/Type/Part/Product Number, connector, etc. with your existing battery , carefully before ordering.
2.  Please compare with your original battery before purchase , to make sure you have choose the correct battery model .
3. Before placing your order, Please refer to the picture and check it. Because the products produced by different factories will have differences.
4. Please read the battery manual carefully before installing the battery; If the battery is going to be stored for a long time (more than 3 months), it must be charged over 80%, it must be stored in a dry environment with a temperature range of 10-35 Celsius degree, avoid exposure to the sunlight; Don’t disassemble & crush , don’t pierce the battery with any sharp knife.
5. If the new battery is not recognized during the initial installation, please reinstall and check if the interface is fully connected. Discharge the new battery to 5% (not 0%), then charge and cycle 3-4 times to wake up the new battery.