L18D6PD1, L18M6PD1, 02DL020, SB10K97658, 02DL017, SB10K97657 Laptop internal Battery for Lenovo ThinkPad X390 (20Q0/20Q1), X395 X13 (1st Gen 2020) series 

Technical Specifications 

• Brand : Lenovo
• Suitable Model : Lenovo ThinkPad X390 X395 X13(1st Gen 2020) series
  
• Battery Part Number: 02DL019 L18C6PD1 SB10K97657 02DL018 L18M6PD2 SB10K97656 02DL017 L18M6PD1 SB10K97655 02DL020 L18D6PD1 SB10K97658 5B10W13923 5B10W13924 5B10W13925 5B10W13926
• Cell Chemistry : Lithium-Polymer
• Backup time : Depends on your consumption and usages.
• Life cycles : 500+ Times
• Product Condition : Brand new & Original (Real capacity, high quality cells, longer life cycles, convenient to use)
• Safeguard : Against incorrect voltage, short circuit, internal overheating.
• Warranty: 06 Months(180 days)

Note:

1. The first use of the battery, the battery voltage may be too low, you need to recharge the standby 06 to 08 hours before normal use.
2. First of all you should use the original AC Adapter/Charger in your laptop. Otherwise, WIT  is not liable for any kind of damages.

*** Attention:  

1. To avoid wrong order placed or wrong item you bought, please check out the battery image, Model/Type/Part/Product Number, connector, etc. with your existing battery , carefully before ordering.
2.  Please compare with your original battery before purchase , to make sure you have choose the correct battery model .
3. Before placing your order, Please refer to the picture and check it. Because the products produced by different factories will have differences.
4. Please read the battery manual carefully before installing the battery; If the battery is going to be stored for a long time (more than 3 months), it must be charged over 80%, it must be stored in a dry environment with a temperature range of 10-35 Celsius degree, avoid exposure to the sunlight; Don’t disassemble & crush , don’t pierce the battery with any sharp knife.
5. If the new battery is not recognized during the initial installation, please reinstall and check if the interface is fully connected. Discharge the new battery to 5% (not 0%), then charge and cycle 3-4 times to wake up the new battery.